A set of KosiM Pro silicon carbide oil grinding stones 150/500/2000/8000 grit glued to aluminum blanks.
The set includes 4 oil stones 150/500/2000/8000 grit (or F150 / 320/600/1200).
They work with carbon stainless and powder steels.
The highest quality of the world level.
All products undergo the highest quality control and have all the necessary quality certificates.
KosiM was developed specifically for sharpening knives on manual sharpening machines.
For those people who value their time - stones work very quickly and very well.
Quite high abrasive capacity without adding extra effort.
Very high concentration of grains.
The highest culture of production.
Without large splashes.
Without adding used grain and questionable quality of raw materials in general.
Only for you, only better.
Recommendations for use
150 (F150) works quickly, wear-resistant, cleans well. Suitable for rough stripping or forming a sharpening angle.
500th (F320) in most cases, sharpening begins with it. He works energetically, keeps his shape perfectly. Cleanliness of work at a very high level.
After 500 (F320) on 2000 (F600) you need to seriously relieve the pressure on the stone and a minimum of oil. Otherwise, the 2000 (F600) has an increased rate of production of excess suspension. If there is a minimum of oil and a minimum of pressure, everything is just fine. The speed and cleanliness is amazing.
8000 (F1200), although the same hardness as 2000 (F600), is noticeably stronger, but still just as fast.
Not recommended for mild steels.